M100 Usb Downloader Emulator For Smartrf04eb Cc1110 Cc2530 Zigbee Module

US $9.47

Shenzhen, China
Jun 9th

Open on mobile:
QR code

The CC Debugger is an essential tool for debugging and programming the flash on CCxxxx 8051-based System-on-Chip (SoC) devices from Texas Instruments. It is also compatible with CCxxxx RF transceivers and can be used to configure CC85xx devices with PurePath Wireless Configurator. This CC Debugger is designed to work with various operating systems such as Windows 2000, Windows xp sp2/sp3, Windows Vista 32bit, and Windows 7 32bit. It has a target voltage range of 1.2V~3.6V and is capable of powering the target board from the debugger. The CC Debugger supports various software including IAR Embedded Workbench For C8051, SmartRF Flash Programmer, SmartRF Studio, SmartRF Packet Sniffer, and PurePath Wireless Configurator. It connects to a computer via a USB interface and to the target board through a 10-pin IDC connector (2x5 2.54mm pitch). The LED status indicators on the CC Debugger provide important information. The OFF status indicates that there is no power or valid firmware on the debugger. The AMBER status with both LEDs on indicates that the debugger is powered but there is no valid firmware. The RED LED blinking status suggests that the debugger is in Boot Recovery Mode. The RED LED ON status means that no device is detected, which could be due to old firmware or a hardware connection issue. The GREEN LED ON status indicates that the target device has been properly detected and programming/debugging can begin. The CC Debugger offers several enhancements over previous models. It has an expanded GPIO header with 40 pins, four USB 2.0 ports, and a micro SD card slot. It also has lower power consumption, improved audio quality, and a neater form factor. The CC Debugger is available at shelly5202 Store, located in the biggest electronic market in China. They specialize in electronic components, including ICs, capacitors, diodes, resistors, LEDs, and transistors. They offer competitive prices, good quality products, and a wide range of items. They provide a NO-QUESTION-REFUND policy for customer satisfaction. Customers can pay $3 to get a tracking number for orders less than $25. For orders over $25, a free tracking number is provided. The store ships worldwide with airmail service and provides a combined shipping discount for multiple items. Shipping times vary depending

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	NG
Type	Electronic modules
MPN	NOT
Country	Made in China