375 5 for sale, brand-new and used.

This listing is for a quantity of two each per sale!!! You get TWO 22X4mm LYSO Crystals with all sides Polished and ready to use. Many may come with some PTFE reflective tape already wrapped around the long sides that can easily be removed if desired.

AMR 375 Flexible Disc Coupling RSB

Up for sale is a huge lot of V-belts, Cogged, Timing, Etc. This is a huge lot of belts, and they are all expensive belts. There is well over $50,000 worth of inventory here.

PLASTIC INJECTION TOOLING STEEL MOLD DIE FOR GOLF DIVIT TOOL MAKE SOME $$$ THIS IS FOR MAKING GOLF DIVIT, HAS GREENLYNX LOGO IN IT NOW, BUT, A TOOL MAKER CAN MAKE THAT GO AWAY AND PUT YOUR LOGO IN THERE IF DESIRED. APPROX. OVERALL DIMS = 5.125" CLOSED X 5" X 8" DISTANCE BETWEEN PINS ON AN ANGLE APPROX.

PLASTIC INJECTION TOOLING STEEL MOLD BASE, MAKE TRANSCRYPT INTERNATIONAL LENS APPROX. OVERALL DIMS = 9.25" CLOSED X 12" X 11.75" INSERT APPROX. DIMS 10" X 5.25 ON EJECTOR SIDE AND HOT SIDE IS SOLID.

PLASTIC INJECTION TOOLING STEEL MOLD DIE BASE FOR PLASTIC PLUGS OVERALL DIMS. = 10.375" X 9.875" X 20" INSERTS APPROX. DIMS = TWO =6.625" X 8.5" AND TWO = 6" X 8" DISTANCE BETWEEN PINS SIDE TO SIDE APPROX.

PLASTIC INJECTION TOOLING STEEL MOLD DIE BASE, SEAGULL SCIENTIFIC, GOOD TEST UNIT! OVERALL DIMS. = 7.75" X 9.875" X 8" INSERTS APPROX.

PLASTIC INJECTION TOOLING STEEL MOLD BASE MAKES FIM CLIP OR USE FOR ? OVERALL DIMS APPROX = 9.5" CLOSED X 13.375" X 15" INSERT DIMS APPROX. = 10 X 12" ON HOT SIDE ONLY, EJECTOR SIDE IS CUT IN SOLID.

PLASTIC INJECTION TOOLING STEEL MOLD DIE. MAKES ROYS COMMANDER WHISTLE. MISSING BOTTOM SLIDE TO MAKE RECTANGLE HOLE IN MOUTH PIECE.

PLASTIC INJECTION TOOLING STEEL MOLD DIE. MAKES SCREAM WHISTLES, MAKE $$ WITH THIS! LOOKS LIKE YOU CAN PUT YOUR LOGO IN THE ROUND INSERT.

PLASTIC INJECTION TOOLING STEEL MOLD DIE, MAKES HOUSING BASE INSERT DIMS APPROX. 5" X 8" ONLY ON ONE SIDE, OTHER IS SOLID. APPROX.

NEW DELTA 31-375 1-Inch x 42-Inch 220 Grit Sanding Belts (5-Pack)

This is 4 Rockwell Aluminum Oxide abrasive belts. The box should hold 5, but there are only 4 belts in it. Measure 1" X 42" grit220.

Lot of (2) Carbon Products Operation / CPO 763708X03 Graphite Electrical Brush

UP FOR AUCTION IS A 5" DIAMOND GRINDING WHEEL , 5" O.D. , 810" WIDE , 1" I.D. 1 1/2" COUNTERBORE ON BOTH SIDES 150 GRIT MADE BY AMPLEX , JFF066 15°X2 THIS IS USED BUT HAS PLENTY OF LIFE LEFT .

NORTON GRINDING WHEEL Click Images to Enlarge

This is a real fine 7 piece set of carbide boring bars , unfortunately the largest size bar is missing and the wooden storage case clasp is broken but can easily be replaced. The bars are all unused and all have a holding diameter of 0.375 " dia. and vary in length and cutting head size .

Blind hole laps 4 - .875 5- .625 3- .562 10- .5